Top

RV Parts & Accessories

LP Gas Equipment

Below is just a sample of the wide range of LP Gas Equipment that White Heather has for your needs, for more details please contact us.

1/4" BSP nut & tail for cast iron ring burners & BBQs.
1/4" BSP male inlet with 8MM tail.
1/4" BSP nut & tail. Concave.
This low pressure camping regulator has a 2kg 100MJ capacity with a 90 deg QCC inlet & a 3/8" BSP (200NIP) outlet.
This 2kg POL regulator has 8mm hose tail & c/w handwheel. It is commonly used for 3-4 burner BBQs.
This QCC regulator, commonly used for BBQs & patio heaters has a 2KG 100MJ capacity with a 90 deg inlet & a 1/4" BSP (209x5x4) outlet.
3/8" BSP male inlet with 8mm tail.
8MM x 8MM brass tee.
Leakcheck is an inexpensive liquid leak detector suitable for quickly and easily locating gas leaks in low and high pressure, liquid and vapour systems.For use on LPG. Leakcheck is water based and contains no caustics that could have an adverse effect on safety valve springs or steel piping. Available in 50 ml spray bottles. WARNING - DO NOT USE SOAPY WATER. CAN CAUSE CORROSION & CRACKING OF BRASS JOINTS
This is ideal for attaching an 8mm LPG hose assembly to a POL cylinder valve.
This is a bullnose O ring for a POL regulator.
This sticker is to put on your LPG locker. Measures 15cm long x 5cm wide.
Atwood

a) Alarm level: 2000ppm of LP gas b) Audio alarm: Min 85dB at 10 feet c) Visual alarm: blinking red LED d) Malfunction: orange LED and chirping sound e) Dimensions: 3.75" x 3" x 1.375" () f) Supply voltage: 12V DC nominal g) IAS tested@: 67% to 133% of supply voltage h) Current draw: typical 70mA - alarm 100mA i) Power conservation mode j) Current draw: 10mA k) Temperature: -17oC to 65oC l) Humidity: to 95% () at 60oC m) Storage temperature: -40oC to 65oC n) Warranty: limited, 1 year o) Standards: IAS tested to UL 1484 Residential and RV and CGA CR - 96.003
CE

This wall mounted 12V gas detector gives an audible & visual warning when a gas leak is detected. Ideal in caravans, motorhomes, boats homes etc.Fast response & reliable performance. Simple installation.
Coleman

Allows lanterns & single burner stoves with Coleman lightweight LPG bottle connection to use refillable LPG cylinders with 3/8 LH fitting.
Allows 2 burner stoves with 3/8 LH fitting hose to run on Coleman lightweight bottle.
Allows lanterns & single burner stoves with Coleman lightweight LPG bottle connection to use refillable LPG cylinders with 3/8 LH fitting.
This is a 1.5M long LPG hose with POL fitting.
This is a 1.5M long LPG hose with 3/8" L/H fitting.
For conversion of blue Roadtrip Grills to Coleman lightweight bottle.
Gasmate

3/8" nut & liner. R/hand with 8mm tail - concave.
9Kg LPG OPD Cylinder.Also available in galvanized. ( Ideal for boating )
This adaptor connects to a camping (3/8inch BSP) cylinder and creates two appliance connections, individually controlled by valves.
This adaptor converts a camping(3/8inch BSP) cilinder valve to a POL outlet.
This adaptor converts a camping (3/8inch BSP) cylinder valve to a POL outlet and has a 90 degree elbow.
This LPG high pressure hose has a QCC cylinder fitting to male valve 1".
This adaptor will convert a kosan type cylinder valve to a camping 3/8" BSP type valve.
This adaptor will convert a Kosan type cylinder valve to a POL connection.
This is an internal rubber washer for CA-20 adaptor.
This 600mm long high pressure LPG hose is made for Gasmate cookers. Features a safety shut off valve that will not allow gas flow unless properly connected.
This adaptor converts a POL cylinder valve to a camping (3/8inch BSP)type valve. It has a 50mm extention allowing a lantern with a Companion type fitting to be used with the cylinder.
This adaptor converts a POL cylinder valve to a Primus female inlet valve. This adaptor has a 50mm estension allowing a lantern with a Primus type fitting to be used with the cylinder.
This adaptor converts a POL cylinder valve to a camping (3/8inch BSP) type valve. This allows appliances with camping type fitting to be used with a cylinder win a POL valve.
Jayco

Copper pigtail POL x 1/4" inverted flare.
Marshall

Ideal for running multi appliances in your caravan. Improved model as No cresent required .
SAE

Reducing union 3/8" x 5/16".
BSP male tapered x BSP female elbow 1/4" x 1/4".
SAE gas flare nut 3/8".
SAE all male 3-way tee connector 5/16".
SAE all male 3-way tee connector 3/8".
SAE flare nut 5/16".
SAE flare nut 3/8".
SAE male x BSP tapered male union 3/8" x 1/4".
SAE male x SAE male double union 3/8" x 3/8".
SAE male x BSP female union 3/8" x 1/2".
SAE male x BSP female union 3/8" x 1/4".
SAE male x BSP female union 3/8" x 3/8".
SAE male x BSP female union 5/16" x 3/8".
SAE male x BSP female union 5/16" x 1/4".
SAE male x BSP male tapered elbow 5/16" x 3/8".
SAE male x BSP tapered male union 3/8" x 3/8".
SAE male x BSP male tapered elbow 5/16" x 1/4".
SAE male x BSP tapered male union 5/16" x 1/4".
SAE male x BSP tapered male union 5/16" x 1/8".
SAE male x BSP tapered male union 5/16" x 3/8".
SAE male x SAE male double elbow 5/16" x 5/16".
SAE male x SAE male double union 5/16" x 5/16".
SAE reducing flare nut 3/8" x 5/16".
Welding

This versatile & functional unit is perfect for the professional, home handyman, mechanic or hobbyist. Kit includes 1.5M hose, bakelite hand peice, brush & pencil point burners, flame spreader, soldering tip, multi-purpose spanner & valve. Components fit into handy storage case.